Skip to main content

///M Clubsport Door Sills Search

Whilst starting the preparation and install for my Karbonius CSL Carbon Fibre Roof I started thinking about the final overall style of the car again. It particularly came to the front of my mind when a friend, who was working with me on the roof install, asked what the deal with the CS badge on the boot was. I realised tat whilst that choice had made sense to me it may not really land with others who are unfamiliar with BMWs and understand the history of the CS badging or the idea of what the Clubsport moniker encapsulates.

From previous research and investigations into Clubsport branding from BMW that I could use to keep the style I knew of the somewhat rare E46 330i Clubsport so i thought I should take another look to see if there was anything from that that might help pull the theme together at all. It was at that point that I came across the ///M Clubsport door sills that are used on the E46 330i Clubsport. 


They struck me as perfect to help tie the theme together. They are an official BMW part for the E46 model, they capture the exact naming I am trying to get across and they are rare which will help the car remain unique at the same time. As a result I have started being on the look out for ///M Clubsport door sills to help finish off the style. Having the name branded there should help make the CS boot badge make more sense without having to use aftermarket parts so still staying true to an existing BMW theme of sorts. Although being rare they can be a bit pricey so the search may take me some time.

Labels:

Comments

Post a Comment

Popular posts from this blog

Mishimoto Cooling Upgrade Order

As the car had done ~94k miles I thought it would be time to refresh the cooling system as part of the build project. It also gave me an opportunity to remove the viscous clutch fan, as I have never liked these. This is similar to my dislike for sleeving engines that aren't low-revving V8's, I have no science to support why I don't like them, I just don't. My main driver here was to upgrade to something better than stock with increased reliability. As with my other parts decisions I also wanted to stick to something that for the most part came as a ready to install kit specifically for the E46 M3. Fortunately (or unfortunately) there was a lot of options to chose from when it came to cooling upgrade for the E46 M3. I compiled a list of some of the options I reviewed / considered: Zionsville Radiator Fluidyne Radiator and Oil Cooler C&R Radiator and Oil Cooler Mishimoto Radiator and Oil Cooler CSF Radiator and Oil Cooler I am sure there is more opti...
Post a Comment
Read more

Radium Automotive Fuel Pump Install

Now I had some time and while the Fuel tank was out I thought it was time to install the new Radium Automotive Fuel Pump Install Kit (with Walbro pump). The instructions provided by Radium Automotive for this are extremely straight forward. In general I followed these instructions although I did make a few adjustments along the way to better suit my build. Radium Automotive Fuel Pump Install Kit Instructions Instead of reusing the plastic convoluted tube I decided to run a new line using Gates Submersible Fuel hose. Unfortunately due to the bend radius of the hose it was getting quite close to kinking when installed in the correct manner. To solve this I got a hose anti-kink spring from a local hose supplier. It wasn't the exact size required but it was tight enough to the hose that it would not be able to kink completely flat, the outlet pressure from the pump should keep the hose "open" providing it doesn't completely kink. So whilst not completely optimal, I st...
Post a Comment
Read more