Skip to main content

Posts

Showing posts with the label Install

Syncro Design Works RTAB Install

Now it was time to get around to trying to install my new Syncro Design Works RTAB's. As I had not borrowed the RTAB tool from Syncro Design Works I was going to have to try figure this out on my own. At first I attempted to rig up a press on the outer ring of the RTAB using my 3-jaw puller which was more complicated than you would think. This did work quite effectively but annoyingly there wasn't much space in the jaws for how deep the press was so I had to use a somewhat flimsy grease cap to try push on the outer ring. This worked for about half the press then it completely crushed itself so I aborted before any pressure was applied to the bearing's inner race. Unfortunately I didn't manage to snap any pictures during this operation so all I have is this photo of where I had to stop: Luckily I have a mate who has a bearing press anyway so I wasn't completely out of options. This was an easy option for me as my Rear Trailing Arm was out of the car as part ...

AVIN Avant-2 Install

I managed to arrange some time with a mate to help me install the AVIN Avant-2 and other goodies I ordered a little while back. Now being my first DIY job on the car I wanted to get a little bit of help so I went searching the forums for a guide. Luckily I managed to find some over at E46Fanatics: AVIN Avant-2 Install Guide AVIN Avant-2 Backup Camera Installation Guide AVIN Avant-2 Front Facing Camera Install Guide (Credit to raichean over at E46Fanatics for building and posting these guides)  So basically following these to the letter I was able to quite quickly and easily install the head unit, front facing camera and backup camera.  So far it is a massive improvement over the standard BMW Business Radio I removed. I managed to get Torque up and running pretty easily so I can read codes and log OBD-II information.